May 8, 2017 - Free download BMW INPA EDIABAS software all in one. BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update. If you have an interest in programming your E90 BMW vehicle, there are 2 important. 3 – USB Interface Configuring; Step 4 – Using INPA; Step 5 – Using NCS Expert. NCSExpert (Version: 3.1.0 with Daten Files Version: 51.2 or above); Inpa.

INPA/EDIABAS Windows 10 64-bit Installation Guide Link for color coded Guide: NOTE: I am NOT responsible for any damage YOU do to your car or computer. INPA will work with few select things for an E38 such as restting adaptations, diagnostics, code reading, etc. NCS Expert will NOT run on a 64-bit operating syetm. If you have a 32-bit version of Windows 10, please feel free to try ECS Expert and let me know if it works!

I have NOT tried INPA with any other bmw models. Please feel free to comment your success on other models!! Download links will be posted at the bottom of this page. You will Winrar or 7zip or a.rar file extractor similar to those. Should you get ANY errors or pop-ups during any phase of the installation, ignore them. INPA will still install. Pre-Installation 1.Download all required files and programs,as listed below.

Also you should have the K+DCAN cable in your posession(link provided below). 2. Igo primo 9 6 wince 6 480x272 lcd. Extract the INPA.rar to your desktop. You will be left with INPA folder. 3.Extract INPAcable.rar to your desktop. You will be left with INPA cable folder. Installation - Phase 1 1.Open INPA cable folder and move the top four folders (step1, step2, step3 and driver) to Windows(C folder of your PC.

2.Whilst in Windows(C, open 01_Step1 folder and copy EC-APPS over to your Windows(C drive. 3.Go back to 01_Step1 folder and open the NFS folder.

Open Entpackt folder. Open disk 1, find SETUP.exe and right-click it. Goto Properties/Compatibility and set it to run in compatibilty mode for Windows XP (Service Pack 3). Also, check the box for Run as Administrator. Hit Apply then Ok.

4.Double-click SETUP.exe to launch. Once window pops up, select Windows XP. Click Weiter (it means Next). 6.Click Weiter 3 more times.

Make sure User Mode is selected. Click weiter. 7.Make sure top choice is selected (1 Parametri.). Click Weiter. 8.Ensure OBD is selected.

Press weiter. Ensure Kein API-TRACE. Click weiter.

Ensure Kein IFH-TRACE is selected. Click weiter.Ensure Komfort(.IPO) is selected. Press weiter. Press ok, and again.

Press any key to continue. 10.Select Ja,Computer jetzt neu starten. Click Breeden.

This will restart your PC as needed. Phase 2 1.Goto Windows(C /02_Step_2/INSTALL and right click on Instprog.

Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch. 2.Press OK if prompted. Select Enlgish then press weiter.

3.Press continue and continue again. Ensure destination is under C: 4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue. 5.Check off all white boxs. There will be 2 update and 1 complete that needs to be checked.

Press continue, and again. You may get error. Otherwise, press End. 6.Restart your PC once more manually. Phase 3 1.Goto Windows(C /03_Step_3/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.

2.Press OK if prompted. Select Enlgish then press weiter. Ezhik zheka vse serii torrent.

3.Press continue and continue again. Ensure destination is under C: 4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.

5.Under INPA 5.0.1, check off Update. Under NCS Expert 3.0.8, check off Complete.

Press continue. 6.Click on Rename. In the box, type the number 1 and press continue, and again. You might gett error. IF prompted, press End. Phase 4 1.Plug in your K+DCAN cable.

You will from now on use ONLY that port. **Windows 10 will autoatically update the driver IF needed. Windows 10 also already has a serial function. This is all we need to modify.** 2.In your search box (lower left of screen next to Windows button), type 'Device Manager'. Click on the top option.

3.Once in Device Manager, locate Ports(COM & LPT) and click on the little plus sign next to it. It should now show USB Serial Port (COMx) under Ports(COM & LPT). **The little 'x' is in place of whatever number you have the cable plugged into). 4.Right-click on USB Serial Port (COMx) and click Properties. 5.Goto Port Settings tab. Click Advanced.

Change the COM Port Number to COM1. 6.Change Latency Timer from 16 to 1. Press ok again. Close Device Manager. 7.Goto Windows(C /Driver_D_CAN_USB and double-click OBDSetup.exe. Phase 5 1.Go into Control Panel/System/Advanced System Settings/Environment Variables.